Laboratory Equipment

Product Details:

1 - 3 indicates a very acidic substance 4 - 6 indicates an acidic substance 7 indicates neutral 8 - 11 indicates alkalinity 12 - 14 indicates a very high level of alkalinity. Note: This paper does not apply to buffer solutions and very weak acid-base solution concentration lower than 0.01%. The test strip colour changes must be matched with the pH scale colour chart within about 15 seconds.

Product Details:

Key Features

• Most Advanced Design.

• Easy to Operate & Install.

• Economical & User Friendly.

• Bottom Fire Using LPG/Wood/Coal & Electric.

Product Details:

We are dealing following tools

Product Details:

LEARNING OBJECTS/EXPERIMENTATION:
➢ To study the Vapour Compression air conditioning cycle.
➢ To Calculate Co-efficient of performance- (COP) by the use of P-H diagram. 

Product Details:

• 4 Way measurement (Inside, Outside, Depth, Step).

• With thumb lock and bezel.

• Stainless Steel smooth slides.

Product Details:

Temperature of the furnace is controlled by microprocessor based Programmable controller (1x14 segment, dwell, hold, ramp, timer all with Also provide calibration report of controller by NRL lab if requirement by costumer, with soft touch keypad and dual display of process & set temperature. The overshoot & undershoot of temp. Variation is drastically reduced compared to normal ON / OFF type-controlled furnace.

K type Sensor

To work on 415 Volts A. C. Three Phase Supply,

25 to 30 Ampere each Phase Approx., 12 to 15 kilo watt load Approx. 

 INNER MUFFLE SIZE:

W         x       H          x     D

600mm x      600mm   x     600mm

(24"x 24"x24") Inch

Product Details:

Temperature of the furnace is controlled by microprocessor based Programmable controller (1x14 segment, dwell, hold, ramp, timer all with Also provide calibration report of controller by NRL lab if requirement by costumer, with soft touch keypad and dual display of process & set temperature. The overshoot & undershoot of temp. Variation is drastically reduced compared to normal ON / OFF type-controlled furnace.

K type Sensor

To work on 415 Volts A. C. Three Phase Supply,

25 to 30 Ampere each Phase Approx., 12 to 15 kilo watt load Approx. 

 INNER MUFFLE SIZE:

W         x       H          x     D

600mm x      600mm   x     600mm

(24"x 24"x24") Inch

Product Details:

• A small spring type strip makes contact with one of the prongs.
• Small mirror reflector and a vibrator are attached to the prong of the tuning fork.
• The stand also has an arrangement which allows the apparatus to be used in either horizontally or vertically.
• Operates on 6 Volts, D.C. Supplied with scale pan, bench clamp with pulley, but without weights & twine thread.

Product Details:

The one end of suspension wire hangs from the universal clamp with help of a chuck nut and another end of wire is clamped to solid brass disc of 12.5cm dia and 1.25cm thick with the help of chuck out. A heavy metal ring of the same metal and the same diameter as the disc.When is placed on the disc, the moment of inertia and the period of vibration of system is incread.

Product Details:

MaterialStainless Steel
DisplayAnalog
Frequency50 Hz
Horizontal arm75 cm
Vertical arm20 cm
Weight set100 gm to 1 kg

Product Details:

• This precision formed stainless steel wet film comb is long lasting and reusable and is supplied in a range of thicknesses measuring up to 3000um
• Practical and convenient, easy to operate, easy to carry
• The interval division is detailed and having high measuring precision
• Thickening design, not easy to wear, long service life.
• Used for measuring the thickness of wet paint film on the surface of new coatings, chemical industry, adhesives, architectural coatings, colors, varnishes and other coatings during

Product Details:

Cross Hatch Cutter Adhesion Tester Cross-Cut Adhesion Tester Kits with 1mm/2mm/3mm Blades, Magnifier, Handle, Brush and 3m Tape